More Info: http://www.fredbeansparts.com/index.php/grimmspeed-3-inch-subaru-downpipe-adapter.html

The most guaranteed leak you will get though is if you run an aftermarket 3″ downpipe to an OEM or OEM like 2.5″ Exhaust. Compare our adapter to the competition and you will immediatly see why we offer the best solution to finally end that pesky leak.

Cut from Steel and hand welded these pieces were born tough. With the ability to work with both flat style gaskets AND donut gaskets they cannot be matched. If that wasn’t enough we flared out one end to just shy of 3″ so that unlike the competitors, our adapter will not block flow!

A Final solution to pesky problems, it’s what you can expect from GrimmSpeed.

•Flared Adapter Transition!
(Creates a smooth transition from your 3″ downpipe to your OEM midpipe)
•Flanged for OEM Donut Gasket
•Indestructible Steel CNC Laser cut construction
•Simple bolt on installation.
(With bolts included)
•Will Not obstruct exhaust flow like other adapters.
(Flared end guarantees smooth exhaust flow)

Each year, thousands of diehard off-road enthusiasts descend upon Moab, Utah, for the Easter Jeep Safari and a week of fun on some of the country’s best and most rugged trails. Jeep® and Mopar are marking the occasion by returning to the annual event – which takes place April 16-24 – with six new customized vehicles.

“The annual Moab Easter Jeep Safari provides us a perfect opportunity to interact with our most loyal fans in a true Jeep setting,” said Mike Manley, President and CEO – Jeep Brand, Chrysler Group LLC. “We are able to demonstrate and test new potential Jeep production and customization ideas at our away-from-home proving ground, while getting instant feedback from our customers.”

More than 30 percent of the people who are in the market for a new vehicle are influenced by the breadth and availability of aftermarket accessories and Mopar comes to the party with a vast selection of accessories that will fit a variety of lifestyles.

“From full engine packages to slush mats, Mopar has everything for the avid off-roader,” said Pietro Gorlier, President and Chief Executive Officer – Mopar, Chrysler Group’s service, parts and customer-care brand. “In fact, Mopar covers the spectrum with more than 280,000 proven quality-tested parts and accessories that allow customers to personalize their Chrysler, Jeep, Dodge, Ram and Fiat vehicles.”

Over the past decade, a dedicated group of engineers, designers and fabricators from Mopar and Jeep have customized more than two dozen vehicles and a host of off-road parts and accessories, and showcased them to the enthusiast crowds in Moab.

More Info:

More Info:http://www.fredbeansparts.com/index.php/magnaflow-subaru-legacy-gt-catback-exhaust.html

The Magnaflow 2010+ Subaru Legacy GT Catback is constructed of 3.0in Piping, with Dual 4.0in Polished Stainless Steel Tips. This exhaust is perfect for those who want to add a little more “throaty” / Deep tone – but without waking the neighbors & attracting the local authorities. The midpipe tapers to 2.5″ at the downpipe flage so it will still bolt up nicely to your OEM downpipe if you choose.

Features and Benefits:
Lifetime Warranty, Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last.

Shop Here: http://www.fredbeansparts.com/catalogsearch/advanced/result/?manufacturer=77

More Info: http://www.fredbeansparts.com/index.php/perrin-mitsubishi-evo-x-upper-boost-tube-kit.html

Better Tubing:
PERRIN boost tubes replace the OEM expandable rubber hoses with hard aluminum pipes and non expanding silicone couplers. Our hot side tubing features a 2.5″ outside diameter versus the stock 2.325″ tubing.

Construction:
PERRIN boost tubes are CNC mandrel bent with high quality rolled beads to hold more boost. The smaller boost tube also features a super beefy upper chassis mount.

Silicone:
Our upper boost tubes use high quality 4 ply silicone couplers. The hot side plumbing features 2 tubes connected by a “hump” style coupler to allow engine movement without breaking tubes or tearing couplers.

Blow off valve:
The PERRIN upper boost tube kit relocates the blow off valve hose for cleaner simpler installation which makes blow off valves easy and quick.

T-Blot Clamps:
PERRIN T-bolt clamps are designed for uniform clamping at all points around the band. The wider band distributes the force over a larger area and the Fine threaded bolts with nylon lock nuts allow for accurate torque and proper clamping. Never re-tighten down the road, plus each PERRIN logoed clamp is made in the USA and has the torque spec engraved on each one.

More info: http://www.fredbeansparts.com/index.php/mishimoto-evo-x-aluminum-intercooler.html

Crafted using TIG welded, high-quality aluminum, the Mishimoto Mitsubishi Evo X intercooler is designed to provide added horsepower through improved cooling efficiency.

specs:
Overall Size: 31.7” x 14.5” x 3.45”
Core size: 20.0” x 11.5” x 3.0”
Inlet/Outlet: 2.5”
Fin Pitch: 9.8 Fins/Inch
Tank Wall Thickness: 2.5mm
Application Specific Mounting Points